ECTS - Finite Element Analysis for Manufacturing
Finite Element Analysis for Manufacturing (MFGE310) Course Detail
| Course Name | Course Code | Season | Lecture Hours | Application Hours | Lab Hours | Credit | ECTS |
|---|---|---|---|---|---|---|---|
| Finite Element Analysis for Manufacturing | MFGE310 | Area Elective | 2 | 0 | 2 | 3 | 5 |
| Pre-requisite Course(s) |
|---|
| ME210 ve MATH380 |
| Course Language | English |
|---|---|
| Course Type | Elective Courses |
| Course Level | Bachelor’s Degree (First Cycle) |
| Mode of Delivery | Face To Face |
| Learning and Teaching Strategies | Lecture, Drill and Practice. |
| Course Lecturer(s) |
|
| Course Objectives | This course is intended to acquaint the students with the fundamentals of finite element method as a tool for solving linear problems of solid mechanics and steady–state heat conduction problems. |
| Course Learning Outcomes |
The students who succeeded in this course;
|
| Course Content | Direct approach, plane strain, plane stress and axisymmetric problems, principle of virtual work based formulation for 2D problems, FEM for heat transfer problems. |
Weekly Subjects and Releated Preparation Studies
| Week | Subjects | Preparation |
|---|---|---|
| 1 | Introduction to FEM | Chapter 1 |
| 2 | Introduction to FEM | Chapter 2 |
| 3 | Introduction to FEM | Chapter 3 |
| 4 | Introduction to FEA Software | Chapter 4 |
| 5 | Introduction to FEA Software | Chapter 5 |
| 6 | FEA of Linear Elasticity Problems | Chapter 6 |
| 7 | Ex: Beam Bending Problem | Chapter 7 |
| 8 | Ex: Stress Concentration Problem | Chapter 8 |
| 9 | FEA of Plasticity and Non-Linear Problems | Chapter 9 |
| 10 | Ex: Tensile Test | Chapter 10 |
| 11 | FEA of Contact Problems | Chapter 11 |
| 12 | Ex: Air Bending of a Sheet | Chapter 12 |
| 13 | FEA of Problems involving Friction | Chapter 13 |
| 14 | Ex: Plane-Strain Extrusion | Chapter 14 |
| 15 | Final Exam | All chapters |
| 16 | Final Exam | All chapters |
Sources
| Course Book | 1. Nitin S Gokhale, Practical Finite Element Analysis, ISNBN 8190619519, Ohio, 2002 |
|---|---|
| Other Sources | 2. MSc.Marc Student Edition Documentation |
Evaluation System
| Requirements | Number | Percentage of Grade |
|---|---|---|
| Attendance/Participation | 1 | 10 |
| Laboratory | - | - |
| Application | - | - |
| Field Work | - | - |
| Special Course Internship | - | - |
| Quizzes/Studio Critics | - | - |
| Homework Assignments | - | - |
| Presentation | - | - |
| Project | - | - |
| Report | - | - |
| Seminar | - | - |
| Midterms Exams/Midterms Jury | 2 | 60 |
| Final Exam/Final Jury | 1 | 30 |
| Toplam | 4 | 100 |
| Percentage of Semester Work | 70 |
|---|---|
| Percentage of Final Work | 30 |
| Total | 100 |
Course Category
| Core Courses | X |
|---|---|
| Major Area Courses | |
| Supportive Courses | |
| Media and Managment Skills Courses | |
| Transferable Skill Courses |
The Relation Between Course Learning Competencies and Program Qualifications
| # | Program Qualifications / Competencies | Level of Contribution | ||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 1 | Adequate knowledge of mathematics, physical sciences and the subjects specific to engineering disciplines; the ability to apply theoretical and practical knowledge of these areas in the solution of complex engineering problems. | |||||
| 2 | The ability to define, formulate, and solve complex engineering problems; the ability to select and apply proper analysis and modeling methods for this purpose. | X | ||||
| 3 | The ability to design a complex system, process, device or product under realistic constraints and conditions in such a way as to meet the specific requirements; the ability to apply modern design methods for this purpose. | X | ||||
| 4 | The ability to select, and use modern techniques and tools needed to analyze and solve complex problems encountered in engineering practices; the ability to use information technologies effectively. | |||||
| 5 | The ability to design experiments, conduct experiments, gather data, and analyze and interpret results for investigating complex engineering problems or research areas specific to engineering disciplines. | |||||
| 6 | The ability to work efficiently in inter-, intra-, and multi-disciplinary teams; the ability to work individually. | |||||
| 7 | (a) Sözlü ve yazılı etkin iletişim kurma becerisi; etkin rapor yazma ve yazılı raporları anlama, tasarım ve üretim raporları hazırlayabilme, etkin sunum yapabilme, açık ve anlaşılır talimat verme ve alma becerisi. (b) En az bir yabancı dil bilgisi; bu yabancı dilde etkin rapor yazma ve yazılı raporları anlama, tasarım ve üretim raporları hazırlayabilme, etkin sunum yapabilme, açık ve anlaşılır talimat verme ve alma becerisi. | |||||
| 8 | Recognition of the need for lifelong learning; the ability to access information, follow developments in science and technology, and adapt and excel oneself continuously. | |||||
| 9 | Acting in conformity with the ethical principles; professional and ethical responsibility and knowledge of the standards employed in engineering applications. | |||||
| 10 | Knowledge of business practices such as project management, risk management, and change management; awareness of entrepreneurship and innovation; knowledge of sustainable development. | |||||
| 11 | Knowledge of the global and social effects of engineering practices on health, environment, and safety issues, and knowledge of the contemporary issues in engineering areas; awareness of the possible legal consequences of engineering practices. | |||||
| 12 | (a) Knowledge of (i) fluid mechanics, (ii) heat transfer, (iii) manufacturing process, (iv) electronics and control, (v) vehicle components design, (vi) vehicle dynamics, (vii) vehicle propulsion/drive and power systems, (viii) technical laws and regulations in automotive engineering field, and (ix) vehicle verification tests. (b) The ability to merge and apply these knowledge in solving multi-disciplinary automotive problems. | |||||
| 13 | The ability to make use of theoretical, experimental, and simulation methods, and computer aided design techniques in automotive engineering field. | |||||
| 14 | The ability to work in the field of vehicle design and manufacturing. | |||||
ECTS/Workload Table
| Activities | Number | Duration (Hours) | Total Workload |
|---|---|---|---|
| Course Hours (Including Exam Week: 16 x Total Hours) | 16 | 2 | 32 |
| Laboratory | 16 | 2 | 32 |
| Application | |||
| Special Course Internship | |||
| Field Work | |||
| Study Hours Out of Class | 16 | 2 | 32 |
| Presentation/Seminar Prepration | |||
| Project | |||
| Report | |||
| Homework Assignments | |||
| Quizzes/Studio Critics | |||
| Prepration of Midterm Exams/Midterm Jury | 2 | 8 | 16 |
| Prepration of Final Exams/Final Jury | 1 | 16 | 16 |
| Total Workload | 128 | ||