ECTS - Mechanical Vibrations
Mechanical Vibrations (ME425) Course Detail
| Course Name | Course Code | Season | Lecture Hours | Application Hours | Lab Hours | Credit | ECTS |
|---|---|---|---|---|---|---|---|
| Mechanical Vibrations | ME425 | Area Elective | 3 | 0 | 0 | 3 | 5 |
| Pre-requisite Course(s) |
|---|
| MECE204 |
| Course Language | English |
|---|---|
| Course Type | Elective Courses |
| Course Level | Natural & Applied Sciences Master's Degree |
| Mode of Delivery | Face To Face |
| Learning and Teaching Strategies | Lecture, Demonstration. |
| Course Lecturer(s) |
|
| Course Objectives | 1) Identify the equivalent lumped parameter models of mechanical systems; 2) Derive the equation of motion using free-body-diagrams and energy methods; 3) Solve the vibrations of single and two-degrees of freedom systems; 4) Design for reduced vibrations; 5) Understand the Frequency Response Functions and modal analysis; 6) Simulate the systems using computation software. |
| Course Learning Outcomes |
The students who succeeded in this course; |
| Course Content | Temel tanımlar, tek serbestlik dereceli sistemler, titreşim yalıtımı, iki serbestlik dereceli sistemler: hareket denklemleri, koordinat dönüşümleri, temel koordinatlar, titreşim modları, torsiyonel titreşim, çoklu serbestlik dereceli sistemler, koordinat dönüşümler ve normal koordinatlar, modal analiz, harmonik zorlamalı sistemlerin çözümü. |
Weekly Subjects and Releated Preparation Studies
| Week | Subjects | Preparation |
|---|---|---|
| 1 | Concepts of vibrations | |
| 2 | Lumped parameter systems | |
| 3 | Introduction to Matlab: Basics and essentials | |
| 4 | Response of undamped SDOF systems to initial excitations | |
| 5 | Response of damped SDOF systems to initial excitations | |
| 6 | Matlab : Effect of damping of SDOF systems and its measurement | |
| 7 | Response of SDOF systems to Harmonic and Periodic excitations | |
| 8 | Systems with rotating unbalanced mass and base vibrations, whirling of shafts. | |
| 9 | Matlab : Vibration isolation. | |
| 10 | Response of SDOF systems to nonperiodic excitations. | |
| 11 | Response of SDOF systems to arbitrary excitations. | |
| 12 | Matlab session: Convolution integral. | |
| 13 | 2-DOF systems: Equations of motion and free vibrations. | |
| 14 | 2-DOF systems: Modal analysis and response to harmonic excitations. | |
| 15 | Review before Final exam | |
| 16 | Review before Final exam |
Sources
Evaluation System
| Requirements | Number | Percentage of Grade |
|---|---|---|
| Attendance/Participation | 1 | 10 |
| Laboratory | - | - |
| Application | - | - |
| Field Work | - | - |
| Special Course Internship | - | - |
| Quizzes/Studio Critics | - | - |
| Homework Assignments | 7 | 15 |
| Presentation | - | - |
| Project | - | - |
| Report | - | - |
| Seminar | - | - |
| Midterms Exams/Midterms Jury | 2 | 40 |
| Final Exam/Final Jury | 1 | 35 |
| Toplam | 11 | 100 |
| Percentage of Semester Work | |
|---|---|
| Percentage of Final Work | 100 |
| Total | 100 |
Course Category
| Core Courses | X |
|---|---|
| Major Area Courses | |
| Supportive Courses | |
| Media and Managment Skills Courses | |
| Transferable Skill Courses |
The Relation Between Course Learning Competencies and Program Qualifications
| # | Program Qualifications / Competencies | Level of Contribution | ||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 1 | An ability to apply advanced knowledge in computational and/or manufacturing technologies to solve manufacturing engineering problems | X | ||||
| 2 | An ability to define and analyze issues related with manufacturing technologies | X | ||||
| 3 | An ability to develop a solution based approach and a model for an engineering problem and design and manage an experiment | X | ||||
| 4 | An ability to design a comprehensive manufacturing system based on creative utilization of fundamental engineering principles while fulfilling sustainability in environment and manufacturability and economic constraints | X | ||||
| 5 | An ability to chose and use modern technologies and engineering tools for manufacturing engineering applications | X | ||||
| 6 | Ability to perform scientific research and/or carry out innovative projects that are within the scope of manufacturing engineering | X | ||||
| 7 | An ability to utilize information technologies efficiently to acquire datum and analyze critically, articulate the outcome and make decision accordingly | X | ||||
| 8 | An ability to attain self-confidence and necessary organizational work skills to participate in multi-diciplinary and interdiciplinary teams as well as act individually | X | ||||
| 9 | An ability to attain efficient communication skills in Turkish and English both verbally and orally | X | ||||
| 10 | An ability to reach knowledge and to attain life-long learning and self-improvement skills, to follow recent advances in science and technology | X | ||||
| 11 | An awareness and responsibility about professional, legal, ethical and social issues in manufacturing engineering | X | ||||
| 12 | An awareness about solution focused project and risk management, enterpreneurship, innovative and sustainable development | X | ||||
| 13 | An understanding on the effects of engineering applications on health, social and legal aspects at universal and local level during decision making process | X | ||||
ECTS/Workload Table
| Activities | Number | Duration (Hours) | Total Workload |
|---|---|---|---|
| Course Hours (Including Exam Week: 16 x Total Hours) | 14 | 3 | 42 |
| Laboratory | |||
| Application | |||
| Special Course Internship | |||
| Field Work | |||
| Study Hours Out of Class | |||
| Presentation/Seminar Prepration | |||
| Project | |||
| Report | |||
| Homework Assignments | 7 | 3 | 21 |
| Quizzes/Studio Critics | |||
| Prepration of Midterm Exams/Midterm Jury | 2 | 10 | 20 |
| Prepration of Final Exams/Final Jury | 1 | 15 | 15 |
| Total Workload | 98 | ||